Avaya 6402, 6402D Redial, Speaker (Listen-Only)

4

The Redial (or Last Number Dialed) feature automatically redials the last

extension or outside number you dialed.

To redial the last number that you dialed

1. Press .

The redialed number can be an outside number (up to 24 digits), an extension,

or a trunk or feature access code.

Note: The Speaker feature allows you to place calls or access other featu res

without lifting the handset. However, in order to speak to the other

party, you must use the handset.

To place a call without lifting the handset or for any listening-only

feature (such as monitoring a call on which you have been put on hold)

1. Press .

2. Place a call or access the selected feature.

3. Adjust the speaker volume if necessary:

To raise the volume, press the right half of the Volume control button

labeled ; to lower the volume, press the left half of the Volume

control button labeled . If you have a display, it shows the volume

level:

To change from the speaker to the handset

1. Lift the handset and talk.

To change from the handset to the speaker

1. While the handset is off-hook, press .

You can now hang up the handset (within 10 seconds) and the call will

remain active on the speaker. However, in order to talk to the other

party, you must use the handset.

To end a call (while the handset is on-hook and only the speaker is

active)

1. With the handset on-hook, press .

RedialSpeaker (Listen-Only)

Redial

Spkr

->>>>>> +

Spkr

Spkr

Contents

Main Contents 6402 and 6402D Telephones Users Guide Page IMPORTANT USER SAFETY INSTRUCTIONS ! Use ! Service SAVE THESE INSTRUCTIONS The 6402 and 6402D Telephones * Headsets * Headpieces Call-Handling Features without Conference Hold Redial Speaker (Listen-Only) The lights go on steadily, and, if your telephone has a display, all the display segments fill in. Lights return to normal operation. not Getting Messages Test Transfer Message Selecting a Personalized Ring Current ringing pattern plays and repeats every three seconds. You will hear a confirmation tone (two rising tones) and your new ringing pattern is set. Selected Voice Features How to Access a Voice Feature on the 6402 and 6402D Number is stored. Call is automatically dialed. Your calls will now ring at your own telephone. Call is parked at your extension. You are reconnected to the call. Call Forwarding All Calls Call Park You are connected to the ringing call. Present call is put on hold and the red light next to blinks. Message light goes on at the called telephone (if so equipped). Call Pickup Leave Word Calling Message light goes on at the called telephone (if so equipped). Send All Calls Whisper Page Using the Display on the 6402D Installation Desktop Installation without Wall Installation not c. d. a. b. Page Page Removing the Telephone Tray Installing the Telephone Number Card Tones and Their Meaning Ringing Tones Feedback Tones Line and Feature Button Lights Feedback Tones (continued) Line and Feature Button Lights