Octel 100 Configuration Note (7042)

Comdial DXP Confidential Page 3
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the
disclaimer on page 1
Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.
Avaya
Communications Applications Group
3.1 COMDIAL DXP SOFTWARE REQUIREMENTS Rev. 7.A and above3.2 ADDITIONAL MATERIAL REQUIREMENTS When using the DIALOG/4 you will need: One RJ-14 jack with 4-conductor line cord for every two O100ports The specific configuration will vary depending on the type ofstation card being used with the DXP. Refer to the appropriateComdial Installation Instructions (listed above in 3.0). One analog line for remote service access One RJ-11 Jack for above and 2-conductor modular telephone cord. If FaxMail is installed. One analog line per FAX port. The specific configuration will varydepending on the type of station card being used with the DXP.Refer to the appropriate Comdial Installation Instructions (listedabove in 3.0).
One RJ-11 Jack for every Brooktrout TruFax® 200, along with
4-conductor modular telephone cords.4.0 SUPPORTED FEATURES
[ü] Items are supported
System Forward to Personal Greeting Multiple Return to Operator 1[ü]
All Calls [ ]Direct Call 2[ü]
Ring/no answer [ ]Auto Attendant 1[ü]
Busy [ ]Outcalling [ü]
Busy/No Answer [ü]Personal Greeting of Original-Called Party
Do Not Disturb [ ]Multiple Call Forward [ ]
Station Forward to Personal Greeting Double Call Forward [ ]
All Calls [ü]Call Coverage [ ]
Ring/no answer [ ]Intercom Paging [ ]
Busy [ ]Supervised Transfers 1
Busy/No Answer [ü]Call Screening 1[ü]
Do Not Disturb [ ]Call Queuing 1[ü]
Flexible Forwarding Intercom Paging 1[ü]
Forward to No Answer Greeting [ ]Identify Calling Party (Ver. 2.0 and up)
Forward to Busy Greeting [ ]System Forward to Personal Greeting [ ]
Intercom/CO Forwarding [ ]Station Forward to Personal Greeting [ ]
Message Waiting Flexible Forwarding (NA with CO) [ ]
LCD Display [ ]Record Telephone Conversation [ ]
LED [ü]
Lamp [ ]
Audible / Stutter Dial Tone [ü]
Note 1 External Callers Only, See Section 7.1
2 Direct Call Limitations, See Section 7.4
Switch Software Requirements
Additional Material Requirements
Supported Integration Features