Avaya manual Installation, Contents of the 9103 Package, Installing the Batteries

Installation

Use the following procedures for installing your 9103 telephone.

Contents of the 9103 Package

The following items come in the box with the 9103 telephone:

•

•

A 7-foot line cord

A 9-foot handset cord

Installing the Batteries

This telephone requires two 1.5-Volt AA batteries (provided with the set) to retain the numbers stored in memory in the event the telephone is disconnected from the line.

1If the telephone is already connected, disconnect the telephone from the modular jack before you install the batteries.

2Locate the battery compartment on the right side on the bottom of the telephone. See Figure 1 for its location.

3Insert a small pointed tool or a small screwdriver in the “D”-shaped hole to the left of the compartment.

4Press down and slide the cover to the right to open it.

5Insert two AA batteries in the battery compartment. The “–” (negative) end of the battery should be placed against the springs.

6Replace the battery compartment cover and, if applicable, plug the line cord into the modular jack again. If you have not installed the telephone yet, go on to Desk/Table Installation on the next page.

Note: After you replace the batteries, it will be necessary to re-program your memory-dialing buttons.

6