Software installation
Software installation
This section describes how to install, upgrade, and uninstall the Avaya 3100 Mobile Communicator - Client (Avaya 3100 MC - Client) for Nokia on a supported Nokia device. There are two ways to install or upgrade the Avaya 3100 MC - Client for Nokia: from a computer or over the air.
Before you install or upgrade the Avaya 3100 MC - Client for Nokia software from a computer, ensure that your Nokia device and your PC are connected using a Universal Serial Bus (USB) cable and ensure that Nokia PC Suite software is installed on your PC.
Note 1: Ensure that your device has the correct date and time.
Note 2: In some cases, it is necessary to remove the existing software components prior to performing an upgrade. Check with your system administrator or read the release notes before proceeding with an upgrade.
Note 3: If you are upgrading from an earlier release, you must perform an initial software installation, not an upgrade. After reinstalling the software, change the Avaya 3100 Mobile Communicator Gateway address on the Systems Settings screen if instructed to do so by your system administrator.
Note 4: If you wish to use Hypertext Transfer Protocol Secure (HTTPS) with certificates, you should install the certificate prior to installing the Avaya 3100 Mobile Communicator - Client.
Use the following procedures to install, upgrade, and uninstall the Avaya 3100 MC - Client for Nokia software.
•“Installing the Avaya 3100 MC - Client for Nokia software from a computer” on page 15
•“Installing the Avaya 3100 MC - Client for Nokia software over the air” on page 16
•“Upgrading the Avaya 3100 MC - Client for Nokia software from a computer” on page 17
•“Upgrading the Avaya 3100 MC - Client for Nokia software over the air” on page 18
•“Moving the Avaya 3100 MC - Client for Nokia icon to the menu screen” on page 19
•“Uninstalling the Avaya 3100 MC - Client for Nokia software” on page 19
•“Installing security certificates” on page 19
Installing the Avaya 3100 MC - Client for Nokia software from a computer
You can use your desktop PC or laptop to install the Avaya 3100 MC - Client software. After downloading the latest software load, you install it on your Nokia device using a USB connection.
Before installation, install the Nokia PC Suite on your computer and configure the device with the correct date and time.
The following procedure details the steps required to install the Avaya 3100 MC - Client for Nokia software from a computer.
A zipped file contains the Avaya 3100 MC - Client for Nokia software and documentation. Extract the contents of this file to a folder on your computer before you install the software.
Avaya 3100 Mobile Communicator - Client for Nokia User Guide | 15 |
|
|
