Avaya 3100 MC - Client for Nokia configuration
Avaya 3100 Mobile Communicator - Client for Nokia User Guide 21
Avaya 3100 MC - Client for Nokia configuration
This section contains the following topics:
•“Initial configuration” on page21
•“Configuring the client settings” on page22

Initial configuration

The first time you start the Avaya 3100 Mobile Communicator - Client (Avaya 3100 MC - Client) for Nokia
after you install it on your Nokia, you must configure the following parameters provided by your system
administrator:
• your account username and extension
• your account password
• the Avaya 3100 Mobile Communicator Gateway IP address
• your Nokia telephone number
The next time you start Avaya 3100 MC - Client for Nokia, you automatically log on to the network.
The following procedure details the steps required to configure the initial Nokia parameters.
Configuring initial Nokia parameters
1. Obtain your user name, password, Avaya 3100 Mobile Communicator Gateway IP address, and Nokia
telephone number from your system administrator.
2. Start the Avaya 3100 MC - Client for Nokia application. For more information, see “Starting and
exiting the Avaya 3100 MC - Client for Nokia” on page31.
Note: If the Main screen appears, then your basic settings are already configured, and you can start
using the application.
3. Click the Menu key.
4. From the Menu pane, select the Applications folder and then select the Avaya 3100 MC - Client for
Nokia application icon.
The First Time Settings pane appears.
5. On the First Time Settings pane, configure the following parameters.
— In the Username field, enter user name provided by your system administrator.
— In the Password field, enter the password provided by your system administrator.
—In the Primary Server Address field, enter the address provided by your system administration in
the format:
xxx.xxx.xxx.xxx
— In the Primary Server Port field, enter the port number provided by your system administrator.
The default value is 8443.
— In the Use Secure Connection field, select On or Off. The default value is Off.
— In the WLAN Access Point field, select from a list of available WiFi access points already
specified on your device.
— In the Cellular Access Point field, select from a list of available Cellular access points specified
on your device.