LThe console interface configured with the interface Console command must be on
a different subnet from the router interfaces.
6. Use the following commands to set the baud rate, ppp authentication, ppp chap-secret and
ppp timeout required to match your remote station if they differ from the default values:
LThe default values are shown in
bold italic
text.
speed <9600 | 19200 |
38400
>
ppp authentication <chap |
none
| pap>
ppp chap-secret <string>
timeout absolute <time>
LThe time is in minutes.
7. Type: async mode interactive
The following is displayed:
8. Use the supplied DB-25 to RJ-45 connector to plug the console cable to the modem’s DB-25
connector. Plug the other end of the cable RJ-45 connector to the Console port on the
X330WAN.
XThe X330WAN enters Modem mode within one minute.
You can now dial from a remote station, and open a Telnet session to the IPaddress configured
in step 5.
Entering the Modem mode will occur automatically upon
proprietary modem-cable plug-in into the console port.
The terminal mode would be restarted automatically upon
insertion of proprietary terminal-cable.
5