Avent ISIS manual How to assemble the Isis Manual Breast Pump, Do not Overtighten

6. How to assemble the ISIS Manual Breast Pump

Separate all parts and ensure pump has been cleaned and sterilised as in section 3:

1

Wash your hands thoroughly. Insert the white valve (g) into the pump body (f) from underneath making sure the flat side of the valve is downwards and the star side is facing up.

IMPORTANT: DO NOT LOSE THE WHITE VALVE. YOUR PUMP WILL NOT WORK WITHOUT IT OR IF IT IS FITTED INCORRECTLY. If lost, spare valves are available direct from Philips AVENT.

2

Place the pump body (f) onto the Airflex Feeding Bottle (h).

3

Twist gently clockwise until secure.

DO NOT OVERTIGHTEN!

45

6

7

Place the silicone diaphragm and stem (d) into the pump body (f). Make sure it fits securely around the rim by pressing down with your fingers to ensure a perfect seal. (This is easier if assembled whilst wet.)

Place the forked end of the handle (e) under the silicone diaphragm and stem (d) and push down gently on the handle until it clicks into place.

Carefully insert the Let-down Massage Cushion (b) into the pump funnel (f) making sure it is perfectly sealed all round the rim of the funnel. (This is easier if assembled whilst wet.)

Click the pump cover (c) onto the pump body (f). To make the pump completely stable insert the bottle into the stand (i).

6 7