Avenview C-DP-DVI 1.7 Installation

www.avenview.com

1.7 Installation

Follow these steps to connect Avenview C-DP-DVI converter:

1. Connect the DisplayPort connector to the PC, Laptop or any other DisplayPort source device

2. Connect DVI connection to Monitor, TV or Projector

3. Turn on your Monitor/TV/Projector and then DisplayPort source

Please ensure that the display resolution set in PC is supported by the Monitor/TV.

Contents

Main DisplayPort to DVI Converter Table of Contents www.avenview.com 3 Section 1: Getting Started 1.1 Important Safeguards 1.2 Safety Instructions 1.3 Regulatory Notices Federal Communications Commission (FCC) 1.4 Introduction 1.5 Package Contents 1.6 Before Installation 1.7 Installation Section 2: Specifications Item Description