![2.3System Requirements](/images/new-backgrounds/114099/11409925x1.webp)
2.3System Requirements
1.The
2.Before you click on the icon of the software, make sure you have secured the connection between your computer COM port and the
3.The
2.4Software Connection
1.Power up the
2.The first step after running the software is to automatically detect if the device responses correctly through
“Device is not ready. Do you want to try again?” error message will pop up. Please check the availability of COM Port. After the COM port is accurately established, please click on status update button.
If” device is not ready” error pops up then:
-Ensure that DVI-SPLITPRO-2B is powered on.
-Please ensure that serial cable (RS232) is connected properly and available serial port is free to be used by
3.If the serial connection is established, you will see a Windows as shown below:
www.avenview.com | 13 |
|
|