Avenview DVI-SPLITPRO-2BB specifications Installation

Section 2: Installation

Follow these instructions for installation of DVI-SPLITPRO-2B:

1.Ensure that DVI-SPLITPRO-2B and all other source devices are turned off

2.Connect a monitor, a projector or other displays that comes with DVI and/or VGA inputs by using 1 male-to-male DVI (VGA) cable to DVI-SPLITPRO-2B DVI output (you can connect 2 displays equipped with DVI and VGA respectively by a DVI to DVI/VGA breakout cable

3.Plug in DVI to DVI/VGA breakout cable (DDVY01) to DVI-IN and plug in VGA to component breakout cable to the VGA connector of the breakout cable.

4.Connect a monitor, projector, other displays that come with DVI / VGA inputs by using 1 male – male DVI (VGA) cable to DVI-SPLITPRO-2B DVI output. (you can connect 2 displays equipped with DVI and VGA respectively by DVI – DVI/VGA breakout cable)

5.Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout cable.

6.Connect a device equipped with component video output (YPbPr such as DVD player or camera) to the 3-RCA jack.

7.Connect a device equipped with VGA output (such as laptop) to the VGA connector of DVI-SPLITPRO-2B.

8.Connect a device equipped with composite video output to composite input of the DVI-SPLITPRO-2B.

9.Connect your computer with the DVI-SPLITPRO-2B by a 9-pin RS-232 cable and then install the software.

www.avenview.com 9