Avenview SW-DVI-2X4 Regulatory Notices Federal Communications Commission FCC, Introduction

1.3Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

1.4Introduction

The SW-DVI-2X4 allows you to switch between two DVI sources and four DVI displays independently with compact pattern generator functionality. Any input can be switched into any output through a remote control. To simplify the switching process, SW-DVI-2X4 comes with an IR remote control. If you don’t have an IR remote control nearby, SW-DVI-2X4 can also be configured by two DIP switches (one rotary switch and one DIP switch). Furthermore, the SW-DVI-2X4 is designed to regenerates every signal carried to itself so that every signal sent out from the SW-DVI-2X4 is as crystal clear as the original.

1.5Features

-Pixel Rate up to 165MHz.

-Maintains highest resolution digital video with no loss of quality

-Configured by IR remote control with OSD display.

-Embedded Pattern Generator.

-Supports EDID learning. The SW-DVI-2X4 can get the EDID information for the output device and pass it to the input equipment.

-DIP switch configuration. Without IR remote control, the switcher can also be configured by the DIP switch and the rotary switch.

-Can be cascaded more than two tiers. The signal carried to the SW-DVI-2X4 will be decoded and encoded.

-Compact size.

www.avenview.com 4