Avenview SW-DVI-2X4 specifications DIP Switch

1.9DIP Switch

When remote control is not available, the SW-DVI-2X4 can be configured by DIP Switch:

-DIP Switch 1 should always be set to ON

-When you need to configure the SW-DVI-2X4 by DIP switch, set the DIP Switch 2 at ON. Set it to OFF only when you need to control the device with provided remote control

DIP Switch	3 ON	3 OFF
4 ON	Output 4	Output 3
4 OFF	Output 2	Output 1

Rotary switch allows you to select an Input Source or a test pattern.

Rotary Switch	Function
0	Source 1
1	Source 2
2	Pattern 1
3	Pattern 2
4	Reserved
5	Pattern 4
6	Pattern 5
7	Reserved

www.avenview.com 7