Avenview SW-HDM3D-C5-8X8 specifications Output Port

Linkage: Press Linkage button to read back all status

Open / Close : Press this button to Close or Open COM Port.

Mapping Button:

Select All Output:

Select “set all output”, then select the source on main menu.

You can quickly set all output to the same source.

Unselect All Output:

Release output selection.

Select Input1~8-Output:

Select Input Source. Then select the output port icon.

For example:

Select input source 1. Then select output port one and two. The video and audio will be send to port one and two.

Fast Select Button:

Press Fast select button. Quick setting.

Input one  Output Port one

Input two Output Port two

…..

Press Fast select pull down menu.

Select Input Num-Output Num

Input source #1  Output port #1

Input source #2  Output port #2

…..

Select Input* - All Output

Send the same source to all output.

Output Port:

Pull down menu and select which source to be sent to this output port.

One by one setting

On main menu screen.

First select input source. Then select the output ports which you want to send the video and audio from this source. When you select the input source, the source will change to gray. When you select the output port one by one, the selected output port will change to gray.

The linking line will change to yellow.

www.avenview.com 16