BIOS Setup
When the Supervisor Password is set, the new items User Access Level and Password Check will be added in the menu. You can define further access settings rights in the User Access Level item. Setting options: No Access, View Only, Limited and Full Access. The Password Check item is used to specify the type of BIOS password protection that is implemented. Settings are described below:
Setup The password prompt appears only when end users try to run Setup.
Always A password prompt appears every time when the Notebook is powered on or when end users try to run Setup.
To clear a set password, just press [Enter] when you are prompted to enter the password. A message box will show up confirming the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup without entering any password.
About Supervisor Password and User Password
Supervisor Password allows the user to enter and change the settings of the setup menu; User Password only allows the user to enter the setup menu, but doesn’t have the right to make changes.
