Chapter 8
FM Radio
4.Click 
to scan upward or 
to scan downward from the selected channel frequency. The scanning will stop when the application finds the closest ACTIVE FM frequency.
5.Click the Save button if you’d like to keep the newly scanned frequency.
6.If the Save and Next Channel Scan check box is enabled in Step 2, the application will automatically scan the next succeeding channel each time after the Save button is pressed. Click the Stop button when you want to stop the scanning operation.
Channel Versus Frequency Selection
You can tune to FM radio by channel or frequency.
By default, the Numeric Panel allows indicated by the Channel button 
you to select memorized radio channels, as on the panel.
You can switch to selecting radio frequencies by clicking the 
button. When you
see the button change into the Frequency button 
, clicking on the number buttons on the Numeric Panel allows you to select radio frequencies.
Selecting a Channel
To select a channel:
1.Click 
to open the Numeric Panel.
2.There are a number of ways to select a channel:
!Click on the Numeric buttons to select a channel.
!Click the Channel Up/Down button until you reach your desired channel.
OR,
!Use the numeric keys on your keyboard to select a channel.
Selecting a Radio Frequency
To select a radio frequency:
1.Click the Channel button 
. The button then changes to the Frequency
button 
.
2.There are a number of ways to select a radio frequency: