Chapter 2 Operating the EB1304 MPEG4+
2.1Using the EB1304 MPEG4+ for the First Time
Upon connecting the power, the unit automatically detects the status of the hard disk. The hard disk must be formatted before you can use it with EB1304 MPEG4+.
If you are prompt to format the hard disk, press 
(select) for YES to format the hard disk and 
(menu) for NO to remain unchanged.
HARD DISKS INFORMATION
VERSION 1 . 2. 10
HDD CHECKING . . .
HDD
SIZE 76GB 509MB
HDD FORMAT YES (SELECT) / NO (MENU)
Before starting record video, adjust the date first. Press 
to call up the OSD
menu, and then use 
and 
or 
and 
to go up and down and select Submenu. And then, press
or
. In Submenu, select the Date and
press 
or 
again to make a selection. And then, use 
and 
or
and 
to adjust the date and use 
and 
buttons to move the
selection to the left and right.
2.2Surveillance Screen
To know if the channel is being recorded, the “” record symbol would appear beside the channel number. The 
(microphone) and 
(speaker) indicate that the audio is available. The information below the screen shows the current date and time, recording mode (record schedule setting), and the percentage of the used hard disk space.
9