3.2Menu Function
If the unit is currently recording the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection.
OSD MENU | Description |
|
|
MAIN MENU |
|
|
|
| |
CAMERA | SELECT | 1 | 2 | 3 | 4 |
RECORD | SELECT | 1 | 2 | 3 | 4 |
RECORD | MODE | D1 |
|
|
|
VIDEO FORMAT | MPEG4 |
|
|
| |
RECORD | FRAMERATE | 10 |
|
|
|
VIDEO QUALITY | GOOD |
|
|
| |
RECORD SCHEDULE |
|
|
|
| |
SUBMENU |
|
|
|
| |
HARD DRIVE SETUP |
|
|
|
| |
SENSOR | SETUP |
|
|
|
|
MOTION | SETUP |
|
|
|
|
LANGUAGE SETUP | ENGLISH |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
CAMERA SELECT :
Enable/disable the channel number to display the video on the surveillance screen
RECORD SELECT :
Enable/disable the channel number to record video
The channels that are enabled in the camera i select setting can only be set for video
recording
RECORD MODE :
Select D1/CIF recording mode
Under D1 mode, the video recording is in full screen resolution and takes turns from one channel to the next one. Each channel is recorded only at a maximum frame rate of 15fps. You can switch to view the video in single full screen or quad screen
Whereas in CIF mode, video recording is at a lower resolution, but each video is recorded in 30fps/25fps (NTSC/PAL). You can only view the video in quad screen
VIDEO FORMAT :
The recorded video is in MPEG4 format
RECORD FRAME RATE :
Set the number of frames per second to be recorded. Refer to the table below for the available record frame rate settings. The higher the frame rate is, it uses more hard disk space
Video Standard |
|
|
| NTSC | PAL |
Record Mode |
|
|
|
|
|
D1 | 60, 20, 4 | 48, 20, 4 |
|
|
|
CIF | 120, 60, 40, 20, 4 | 100, 48, 20, 4 |
|
|
|
VIDEO QUALITY :
Select the video quality setting from BEST, HIGH, GOOD, NORMAL or LOW.
Choosing NORMAL allows you to record more hours but the quality of the recorded video is moderate. For more information about the recording time, please visit our website and look for EB1304 MPEG4+
LANGUAGE SETUP :
Select from the available language
14