OSD MENU | Description |
|
|
HARD | DRIVE | SETUP |
|
|
OVERWRITE | ENABLED | YES |
| |
HDD | SIZE | 37 | GB | 78MB |
HDD | USED | 0 | GB | 232MB 0% |
HDD | FORMAT |
|
| |
|
|
|
|
|
|
|
|
|
|
*HDD SIZE shows the total capacity of the hard disk.
*HDD USED shows the amount of space that has been used.
OVERWRITE ENABLED :
Enable/disable replacing the earliest record when the hard disk space runs out. By default, the HDD overwrite setting is enabled
HDD FORMAT :
For security purpose, you may have to enter the password to format hard disk
To format hard disk:
1.Use the 
and 
or 
and 
buttons to go up and down and select HDD
FORMAT. Then press 
or
2.In the CHECK PASSWORD screen, press 
or
. Then use the 
and 
or 
and 
buttons to select the security
combination number. Press 
or 
button again to make the selection. Repeat till you key in the last number
To move the selection to the left and right, use 
and 
or 
and 
buttons
CHECK PASSWORD
ENTER PASSWORD
3.After entering the last number, the system will format the hard disk
4.It is done when the “HDD FORMAT COMPLETED” appears
HARD | DRIVE | SETUP |
|
|
OVERWRITE | ENABLED | YES |
| |
HDD | SIZE | 37 | GB | 78MB |
HDD | USED | 0 | GB | 0MB 0% |
HDD | FORMAT |
|
| |
HDD FORMAT COMPLETED
Formatting the hard disk will permanently delete all the records and can no longer be retrieved
17