Avery 7411 manual R i f y i n g S u c c e s s f u l Installation, Troubleshooting

V e r i f y i n g S u c c e s s f u l I n s t a l l a t i o n

When the print server is turned on, it goes through the following startup sequence:

♦It runs through a set of power-up diagnostics for a few seconds. The top orange light comes on when the unit is turned on. The middle light comes on solid yellow when an Ethernet link (wired 10baseT) is established. The bottom comes on solid green when an Ethernet (wired 100baseTX) link is established. Both the yellow and green lights will come on solid when a wireless link is established. The yellow and green lights blink during network activity. The top light blinks orange if there is an error.

Test/Reset Button	Press this button down for less than 5 seconds to
	print a test page on the printer. The test page
	shows the current wireless and network settings of
	the print server. See “Sample Test Page” for more
	information. If the test page does not print, see
	Chapter 5, “Troubleshooting.”
	Press this button down for more than 5 seconds
	while turned on to reset the print server to its
	factory default parameters. The print server re-
	initializes automatically.
LED Status Indicators	The top orange light comes on when the unit is
	turned on. The middle light comes on solid yellow
	when an Ethernet link (wired 10baseT) is
	established. The bottom comes on solid green
	when an Ethernet (wired 100baseTX) link is
	established. Both the yellow and green lights come
	on solid when a wireless link is established. The
	yellow and green lights blink during network
	activity. The top light blinks orange if there is an
	error.
Antenna	A rugged 802.11b/g compatible antenna, mounted
	on the back of plastic-cover printers or on the top
	of metal-cover printers.

1-4Ethernet Operating Instructions