Avocent 1000 manual Appendix A Quick Reference Guide, Appendices, Command, Hotkeys, OSD Control

9

APPENDICES

Appendix A: Quick Reference Guide

Table A.1: SwitchView1000 Quick Reference Guide

Command	Hotkeys	OSD Control	Front-panel	Description
Select	ScrLk + ScrLk + (a)	Cursor keys to	Press	Select the active bank
Server	+ (b) + (y) + (z) ab =	navigate	corresponding	(switch) and channel
	bank no.	Enter to select	button yz on
	xy = channel no.)		Switch ab for
			channel yz on
			bank ab
Next Lower	ScrLk + ScrLk +	Cursor keys to	Press	Select the next lower
Channel	(arrow up)	navigate	corresponding	connected channel
		Enter to select	button
Next Higher	ScrLk + ScrLk +	Enter to select	Press	Select the next higher
Channel	(arrow down)		corresponding	connected channel
			button
Next Lower	ScrLk + ScrLk +	PgUp (w/ OSD	Press	Select the next lower bank
Bank	PgUp	Menu)	corresponding	(switch) with multiple daisy-
			button	chained units
Next Higher	ScrLk + ScrLk +	PgDn (w/ OSD	Press	Select the next higher bank
Bank	PgDn	Menu)	corresponding	(switch) with multiple daisy-
			button	chained units
Autoscan	ScrLk+ScrLk + B	N/A	N/A	Toggle on/off the beep
Beep Sound				sound for switching
On/Off				confirmation while
				autoscanning. The beep
				sound can be turned off
				during normal switching
Load Factory	N/A	Main Menu /	N/A	Restore the EEPROM
Default		Setup / Load		settings to the factory
		Default		default
Change	N/A	Enter (Ins) to	N/A	Change the server name
Server		select/edit		[max. length = 8
Name				alphanumeric characters]
Reset /	ScrLk + ScrLk +	N/A	N/A	Reset the switch/initialize
Initialize	End			the daisy-chain setup