Manuals / Avocent / Computer Equipment / Switch

Avocent 1024 manual Cabling installation, maintenance and safety tips

Models: 1024

1 48
Download 48 pages 13.98 Kb
Page 37
Image 37

Appendices 29

Table D.1: UTP Wiring Standards (Continued)

Pin

EIA/TIA 568A

EIA/TIA 568B

 

 

 

7

white/brown

white/brown

 

 

 

8

brown

brown

 

 

 

Cabling installation, maintenance and safety tips

The following is a list of important safety considerations that should be reviewed prior to installing or maintaining your cables:

•Keep all CAT 5 runs to a maximum of 10 meters each.

•Maintain the twists of the pairs all the way to the point of termination, or no more that one-half inch untwisted. Do not skin off more than one inch of jacket while terminating.

•If bending the cable is necessary, make it gradual with no bend sharper than a one inch radius. Allowing the cable to be sharply bent or kinked can permanently damage the cable’s interior.

•Dress the cables neatly with cable ties, using low to moderate pressure. Do not over tighten ties.

•Cross-connect cables where necessary, using rated punch blocks, patch panels and components. Do not splice or bridge cable at any point.

•Keep CAT 5 cable as far away as possible from potential sources of EMI, such as electrical cables, transformers and light fixtures. Do not tie cables to electrical conduits or lay cables on electrical fixtures.

•Always test every installed segment with a cable tester. “Toning” alone is not an acceptable test.

•Always install jacks so as to prevent dust and other contaminants from settling on the contacts. The contacts of the jack should face up on the flush mounted plates, or left/right/down on surface mount boxes.

•Always leave extra slack on the cables, neatly coiled in the ceiling or nearest concealed location. Leave at least five feet at the work outlet side and 10 feet at the patch panel side.

•Choose either 568A or 568B wiring standard before beginning. Wire all jacks and patch panels for the same wiring scheme. Don’t mix 568A and 568B wiring in the same installation.

•Always obey all local and national fire and building codes. Be sure to firestop all cables that penetrate a firewall. Use plenum rated cable where it is required.

Page 36 Page 38
Page 37
Image 37
Avocent 1024 manual Cabling installation, maintenance and safety tips
Page 36 Page 38

1024 specifications

The Avocent 1024 is a sophisticated KVM (Keyboard, Video, Mouse) switch designed primarily for IT environments that require seamless management of multiple servers and computing systems. This device exemplifies the integration of advanced technology with user-centric features, making it a vital component for data centers and server rooms.

One of the primary features of the Avocent 1024 is its capacity to control up to 24 servers with a single unit. This not only saves valuable space but also significantly simplifies the management process. The user can easily switch between connected servers using either hotkeys or a simple on-screen display, ensuring efficiency in multitasking scenarios. The device supports a wide variety of server types, providing compatibility with both PS/2 and USB interfaces.

Another notable characteristic of the Avocent 1024 is its advanced video support. It is engineered to deliver high-resolution video quality, supporting resolutions up to 1920 x 1200 at 60Hz, ensuring that users can monitor multiple servers with clarity. This capability is crucial in environments where precision is needed, such as software development, server maintenance, and troubleshooting.

The Avocent 1024 employs technology that facilitates remote server management, enabling administrators to maintain control over systems even when physically away. This feature is particularly beneficial in large enterprise environments, allowing technicians to perform administrative tasks, execute file transfers, and respond to alerts without the need for physical presence.

Security is another key focus of the Avocent 1024. The switch offers robust authentication options and supports various security protocols to ensure that only authorized personnel can access the connected devices. This is essential for protecting sensitive data and maintaining compliance with various regulatory standards.

Furthermore, the design of the Avocent 1024 emphasizes ease of use and installation. Its plug-and-play capability allows for quick setup, which is perfect for environments that demand minimal downtime. Alongside this, the device is designed to be rack-mountable, providing flexibility for integration within existing racks.

In summary, the Avocent 1024 KVM switch stands out with its exceptional features, including multi-server management, high-resolution video support, remote management capabilities, enhanced security protocols, and user-friendly design. These attributes make it an indispensable tool for IT professionals and organizations aiming to streamline their server management while ensuring security and efficiency.