62 DSR2035/8035 Switch Installer/User Guide
Table 5.1: Video Viewer Window Description
Letter Description
A Title Bar: Displays the name of the server being viewed. When in Full Screen mode, the title
bar disappears and the server name appears between the menu and toolbar.
B Thumbtack: Locks the display of the menu and toolbar so that it is visible at all times.
C Menu and toolbar: Enables you to access many of the features in the Video Viewer window.
The menu and toolbar is in a show/hide state if the thumbtack has not been used. Place your
cursor over the toolbar to display the menu and toolbar.
Up to ten commands and/or macro group buttons can be displayed on the toolbar. By default,
the Single Cursor Mode, Refresh, Automatic Video Adjust and Align Local Cursor buttons
appear on the toolbar. For more information, see the the

Changing the toolbar

section on
page 63 and the the

Using Macros

section on page 72.
D Macro buttons: Commonly used keyboard sequences that can be sent to the target device.
E Minimize button: Minimizes the display of the Video Viewer window into the task bar at the
bottom of the local computer.
F Maximize button: Changes the window to Full Screen mode, which expands the accessed
device desktop to fill the entire screen. Expanding the window causes the following to occur:
• The title bar disappears.
• The server name appears between the menu and toolbar.
• The Maximize button hanges to a Normal Window Mode button and appears on the toolbar.
Clicking the button toggles the Video Viewer window to Normal Window mode.
• The Close button appears on the toolbar.
G Close button: Closes the VIdeo Viewer window.a
a.The Close button may not be present for all operating systems.
H Accessed device desktop: Interacts with your device through this window.
I Frame: Resizes the Video Viewer window by clicking and holding on the frame.