Appendices 69
2. In the Caret list, choose Block to display the cursor as a block or choose
Underline to display the cursor as an underline. The default value
is Underline.

Enabling and disabling the exit warning prompt

When the exit warning prompt is enabled, a message appears when you select
Telnet - Exit. You may then choose to exit or continue the session. When dis-
abled, the session closes without further prompting.

To enable/disable an exit warning prompt for DSView

Telnet sessions:

1. S elect Options - Preferences from the menu bar.
2. Enable or disable the Prompt on Exit checkbox. The default value
is enabled.
Customizing session properties
When you are connected to a device or port using DSView Telnet, you may
specify session properties that will be stored and reused every time you connect
to the selected device or port. When you select Options - Session Properties in
DSView Telnet, the Terminal, Login Scripts and Logging tabs appear.

Changing the terminal window size

The Terminal Size lists specify the number of rows and columns to display in
the virtual terminal window. These values determine the window’s height
and width.

To change the DSVIew Telnet terminal window size:

1. S elect Options - Session Properties from the menu bar.
- or -
Click the Session Settings icon in the toolbar.
2. Click the Terminal tab.
3. In the Rows list, choose a value of 24 or 48. The default value is 24.
4. In the Columns list, choose a value of 80 or 132. The default value is 80.