Appendices 71
3. In the Arrow Keys list, choose either VT100 or ANSI. The default value
is VT100.
Changing the terminal type
The terminal type is used during Telnet session negotiation. You may change
this value at any time.

To change the terminal type:

1. S elect Options - Session Properties from the menu bar.
- or -
Click the Session Settings icon in the toolbar.
2. Click the Terminal tab.
3. In the Terminal Type box, enter a value of up to 40 characters, beginning
with a letter and ending with a letter or digit. Valid characters are the letters
A-Z, digits Ø-9, forward slash, dash, left parenthesis and right parenthesis.
NOTE: When you are connected to a DS appl iance, the terminal type must be enter ed in the
Termin al Type fi eld exactly as shown below for each terminal emul ation mode:
Terminal E mulation Terminal Ty pe
VT52 DEC-VT52
VT100 DEC-VT100
VT100+ DEC-VT100
VT102 DEC-VT102
VT220 DEC-VT220
VT320 DEC-VT320
Changing the linefeed settings
When connecting to devices that do not insert a carriage return in incoming
or outgoing data, you may instruct DSView to automatically insert a line after
each line of data. This prevents overwriting data when a new line is received.

To change the linefeed settings:

1. S elect Options - Session Properties from the menu bar.
- or -
Click the Session Settings icon in the toolbar.
2. Click the Terminal tab.
3. If the New Line Mode - Inbound box is checked, an inbound carriage
return from the device will be treated as if both a carriage return and
a linefeed were received. If not checked, a linefeed is not added to an
inbound carriage return.