Appendices 39

Appendix B: Safety Instructions

Follow the safety precautions in this document when installing and operating the PM IPDU.

Safety Instructions

Read all the following safety guidelines to protect yourself and your Cyclades PM.

DANGER! All outlets of the PM IPDU output high voltage. Necessary precautions should be taken.

DANGER! To help prevent electric shock, plug the PM IPDU into a properly grounded power source. The power cord is equipped with a three-prong plug to help ensure proper grounding. Do not use adaptor plugs or remove the grounding prong from the cable. Do not use extension cords with the PM IPDU.

DANGER! Do not push any objects through the openings of the PM IPDU. Doing so may cause fire or electric shock by shorting out interior components.

DANGER! There is a possibility of severe electrical shock from either the live or neutral side of any of the power outlets or their wiring, even if one of the circuit breakers is disabled.

IMPORTANT: PM IPDU is intended for enterprise and indoor use only.

IMPORTANT: To help protect the PM IPDU from electrical power fluctuations, use a surge suppressor, line conditioner, or uninterruptible power supply.

IMPORTANT: Be sure that nothing rests on the cables of the PM IPDU and that they are not located where they may be stepped on or tripped over.

IMPORTANT: Do not spill food or liquids on the PM IPDU. If it gets wet, disconnect the power immediately and contact Avocent.

IMPORTANT: Keep your PM IPDU away from heat sources.

Sicherheitsanweisungen

Bitte lesen und befolgen Sie diese Sicherheitsrichtlinien um sich und Ihren PM IPDU vor Schäden zu bewahren.

GEFAHR! Alle Ausgänge des PM IPDU führen Hochspannung. Bitte die erforderlichen Vorsichtsmaßnahmen einhalten.

GEFAHR! Um elektrische Stromschläge zu vermeiden, verbinden Sie bitte das Eingangskabel des PM IPDU mit einer ausreichend geerdeten Stromversorgung. Das Netzkabel ist mit drei Leitungen versehen um korrekte Erdung zu ermöglichen. Bitte benutzen Sie keine Adapterstecker und entfernen Sie nicht die Erdungsleitung. Bitte verwenden Sie keine Verlängerungskabel.

GEFAHR! Bitte führen Sie keine Gegenstände in die Öffnungen des PM IPDU ein. Dies könnte zu Bränden oder elektrischen Schock durch Kurzschluss der internen Komponenten führen.

Page 49
Image 49
Avocent PM IPDU manual Appendix B Safety Instructions, Sicherheitsanweisungen

PM IPDU specifications

Avocent PM IPDU (Intelligent Power Distribution Unit) is a cutting-edge solution designed for efficient power management and monitoring in data centers and IT environments. These devices are essential for businesses aiming to optimize power consumption, enhance uptime, and improve overall operational efficiency.

One of the primary features of the Avocent PM IPDU is its ability to provide real-time monitoring of power usage at the outlet level. This granularity allows IT professionals to track the power consumption of individual devices and make informed decisions regarding resource allocation and load balancing. The device supports multiple power distribution configurations, making it versatile enough to suit a variety of setups.

Incorporating advanced technologies, the Avocent PM IPDU supports intelligent alerts and notifications, enabling proactive management of potential power-related issues. Users can configure customizable thresholds for power consumption, and the system will automatically send alerts if these thresholds are breached. This proactive approach helps in minimizing downtime and averting potential outages.

Another notable characteristic is the comprehensive remote management capabilities of the Avocent PM IPDU. Users can access the unit's management interface via a web-based portal, which provides intuitive dashboards displaying real-time data on power usage, temperature, and environmental conditions. This remote access feature is essential for IT teams managing distributed environments or multi-site operations, as it facilitates quick and effective responses to power concerns.

The Avocent PM IPDU also integrates seamlessly with existing management systems, offering compatibility with various standards and protocols. This interoperability ensures that organizations can leverage their current infrastructure while enhancing their power management capabilities. Additionally, the unit supports power metering and reporting features, enabling detailed analysis of energy consumption trends over time.

Furthermore, Avocent PM IPDU models come equipped with features such as outlet-level control, allowing IT administrators to perform remote power cycling, thus increasing operational efficiency and reducing the need for on-site visits. The units are designed with robust security features, including customizable user permissions and encryption protocols, ensuring that power management operations are protected from unauthorized access.

Overall, the Avocent PM IPDU is an essential tool for organizations striving to improve their power management practices. With its advanced monitoring, remote management capabilities, and robust security features, it is well-suited for modern data center environments where efficiency, reliability, and operational effectiveness are paramount.