Login name
Password

8/16/32 PS/2 KVM over IP switch

Table 1.2: Serial parameters

Use a terminal software (e.g. hyper term or minicom) to connect to PS/2 IP-KVM switch. Reset PS/2 IP-KVM switch and immediately press <ESC>. You will see some device information and a ’=>’ prompt. Enter the command ’config’ and press <Enter>. After waiting a few moments you may configure IP auto configuration, IP address, net mask and default gateway. Pressing <Enter> without entering values does not change settings. The gateway value must be set to 0.0.0.0 (for no gateway) or any other value. You will be asked if the values are correct and get a chance to correct them. After confirming, PS/2 IP-KVM switch performs a reset.

2.Use a crossover Ethernet cable to connect PS/2 IP-KVM switch to a subnet where a DHCP server is available. After the DHCP server has assigned an IP address to PS/2 IP-KVM switch you can use the web interface to configure the device.

Web interface

PS/2 IP-KVM switch may be accessed using a standard web browser. You may use the HTTP protocol or a secure encrypted connection via HTTPS. Just enter the configured IP address of PS/2 IP-KVM switch into your web browser. Initially there is only one user configured who has unrestricted access to all PS/2 IP-KVM switch features:

super (factory default)

pass (factory default)

Please login and change the password immediately according to your own policies.

The Remote Console

The Remote Console is the redirected screen, keyboard and mouse of the remote host system to which PS/2 IP-KVM switch is attached. The web browser who is used for accessing PS/2 IP-KVM switch has to supply a Java Runtime Environment version 1.1 or higher. The Remote Console will behave exactly the same way as if you were sitting directly in front of the screen of your remote system. That means keyboard and mouse can be used in the usual way. Open the console by choosing the appropriate link in the navigation frame of the HTML fronted. Figure 1.3 shows the top of the Remote Console.

Figure 1.3: Top part of the Remote Console

There are some options to choose from and the important ones are the following:

Auto Adjust button

If the video displayed is of bad quality or distorted in some way, press this button and wait a few seconds while PS/2 IP-KVM switch tries to adjust itself for the best possible video quality.

Sync Mouse

Choose this option in order to synchronize the local with the remote mouse cursor. This is especially necessary when using accelerated mouse settings on the host system. In general there is no need to change mouse settings on the host.

Video Settings in Options Menu This opens a new window with elements to control the PS/2 IP-KVM switch Video Settings. You can change some values, for instance the brightness and contrast of the picture displayed, which may improve the video quality. It is also possible to revert to the

5

Page 5
Image 5
Avocent PS/2 IP user manual Web interface, Remote Console

PS/2 IP specifications

The Avocent PS/2 IP KVM (Keyboard, Video, Mouse) switch is a sophisticated solution designed to provide remote access and management capabilities for servers and devices located in data centers or remote locations. As IT environments grow increasingly complex, the need for seamless and efficient management tools becomes essential. The Avocent PS/2 IP addresses this need by integrating high-end features and technologies that streamline operation and enhance productivity.

One of the standout features of the Avocent PS/2 IP is its ability to facilitate secure, remote access to connected devices through an IP network. This enables administrators to control servers and troubleshoot issues from virtually anywhere, eliminating the need to be physically present in the server room. The system supports multiple simultaneous user sessions, allowing multiple administrators to connect and manage devices at the same time, which is crucial for teamwork in large IT environments.

In terms of security, the Avocent PS/2 IP employs robust authentication mechanisms, including user-level access control and encrypted remote sessions. This ensures that only authorized personnel can access sensitive systems, significantly reducing the risk of unauthorized access or data breaches.

The Avocent PS/2 IP is designed to support a wide range of operating systems and server hardware, making it an extremely versatile solution for diverse IT infrastructures. It is compatible with various PS/2 devices and incorporates advanced video quality technologies to deliver high-definition video output, ensuring that administrators receive a clear and accurate representation of the connected systems.

Additionally, the device features built-in monitoring and alerting capabilities. These functionalities allow IT teams to keep track of device status, receive notifications of potential issues, and proactively address problems before they escalate into major outages. The ease of integration with existing management software also enhances its effectiveness.

Another significant characteristic of the Avocent PS/2 IP is its scalability. Organizations can easily expand their KVM infrastructure as their needs grow, allowing for the addition of more servers or devices without requiring a complete system overhaul. This flexibility makes it a cost-effective choice for businesses aiming to future-proof their IT operations.

In conclusion, the Avocent PS/2 IP KVM switch combines advanced remote access capabilities, strong security features, and broad compatibility, making it an essential tool for efficient IT management in today’s fast-paced technological landscape. Its design focuses on enhancing productivity and minimizing downtime, proving beneficial for organizations seeking streamlined operations and superior control over their server environments.