Avocent SuperSerial manual

2.4.3Creating and Using OpenServer ESP Installation Diskettes on DOS

1.Load the Equinox SuperSerial Software CD into your CD-ROM drive.

2.Set your default drive to the CD-ROM drive letter.

3.Run the command MAKEUNIX and select the appropriate Equinox product and operating system for which diskettes are needed.

4.Once the OpenServer installation diskette is created, refer to the following le for detailed installation instructions: /drivers/esp/sco/readme.txt

2.4.4Creating and Using OpenServer ESP Installation Diskettes on Microsoft Windows

1.Load the Equinox SuperSerial Software CD into your CD-ROM drive.

•If you have autoplay enabled, the Equinox SuperSerial Software Installation screen will appear.

•If you do not have autoplay enabled, set your default drive to D: and run the command D:\SETUP, where D: is your CD-ROM drive letter.

2.Click UNIX on the Main Window.

3.Select the UNIX operating system for which you need drivers. Follow the on-screen instructions for creating an installation diskette.

4.Once the OpenServer installation diskette is created, refer to the following le for detailed installation instructions: /drivers/esp/sco/readme.txt

12Equinox ESP Multi-Interface Serial Hub Product Installation Guide