Avsar Emaye San. Tic A.S DVD Copy

AVS DVD Copy

Send comments on this topic.

Copy CD

Overview

Copy CD work mode is used to create an exact copy of the source disc. No data will be changed and

no video will be compressed on the target disc as compared to the source disc.

Select the source drive that you are going to copy from. Please note that in the source drive drop-

down combo box a path to any previously created image located at your hard drive could be specified.

After that you should set the destination drive, which also could be a CD/DVD/BD-drive as well as an

image at your hard drive. In case your destination drive is HDD, AVS DVD Copy will let you select the

destination folder using the common windows explorer.

If you clone a CD/DVD/BD having only one disc drive, a temporary image on your computer HDD will

be created to let you record the resulting disc using the same disc drive. In this case please make sure

that you have enough free hard drive disk space available for the created temporary disc image. Its

size could be up to almost 200 gigabytes for a six-layer BD.

The option Ignore reading CD sectors errors lets you copy damaged discs. In case you know that

your disc is physically damaged (scratched, for instance) the program will still let you copy such a disc,

replacing the defective areas with zero bytes. Thus the disc will become readable again, though some

of the information might be lost.

http://www.avsmedia.com/