Page 14 AXIS 215 PTZ-E Installation Guide

Heater and fan

The heater and fan in the AXIS 215 PTZ-E are controlled by temperature and will be automatically

activated/deactivated according to the following values:

System
integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Intelligent video Video motion detection
Alarm triggers Intelligent video
Alarm events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
Video buffer 9 MB pre- and post alarm
General Casing IP66-rated, rugged aluminum casing with clear dome bubble
Processors and
memory
ETRAX FS, ARTPEC-2, 32 MB RAM, 8 MB Flash
Power 100 - 230 V AC: 1.1 A at 110 V AC, 0.6 A at 230 V AC
Pre-installed 5 m (16.4 ft.) power cable without mains plug
Connectors RJ-45 for 10BASE-T/100BASE-TX
Pre-installed 5 m (16.4 ft.) Cat-5e cable
Operating
conditions
-20 to 40 °C (-4 to 104 °F)
2 built-in heaters, 3 built-in fans
Approvals EN 55022 Class B, EN 55024, EN 61000-3-2, EN 61000-3-3,
EN 60950-1, FCC Part 15 Subpart B Class B, ICES-003 Class B,
C-tick AS/NZS 3548
Power supply: UL, CSA, CE
Weight 4.8 kg (10.6 lb.) incl. cables, excl. wall bracket and sunshield
6.1 kg (13.4 lb.) incl. cables, wall bracket and sunshield
Optional
accessories
Corner mount, pole mount, AXIS T8311 Video Surveillance Joystick,
AXIS T90A illuminators
Included
accessories
1.5" NPT adaptor, Installation Guide, CD with User's Manual,
recording software, installation and management tools, Windows
decoder 1-user license
Temperature Heater Fan
below 15°C ON ON
approx. 20°C OFF OFF
over 26°C OFF ON