28AXIS 231D+/232D+ - Dome Configuration
Advanced
Limits
Define the pan, tilt, zoom and focus limits for the AXIS 231D+/232D+. Movements to the left and right, up and down can be restricted to narrow the area under surveillance. The near focus limit can be set to avoid focusing on objects too close to the camera.
Notes: Once a limit has been saved, this position cannot be exceeded by the AXIS 231D+/232D+ unless the values have been reset and saved to a greater value first (i.e. reset the default values of the mechanical restric- tions).
Continuous zoom or focus movements may not always honour the limits.
Move speed sets the speed of the camera's Pan/Tilt movements. The default setting is maximum speed.
Controls
In the Control settings, use the Ctrl Panel to configure shortcut command buttons.
Calibration
The calibration page gives instructions for calibration of the AXIS 231D+/232D+.
Control Queue
The administrator can set up a queue for the PTZ controllers. Once set up, the PTZ Control Queue buttons appear on the Live View page offering one viewer exclusive control for a limited amount of time. Other users are placed in the queue. For an overview of Pan Tilt Zoom controls, see page 25.
PTZ Control Queue on Live View page
Please use the online help files 
for more information.
