AXIS 231D+/232D+ - System Options 47
About
Third Party Software Licenses - click View licenses for a list of the licensed software used in the AXIS 231D+/232D+ Network Dome Camera.
Resetting to Factory Default Settings
To reset the AXIS 231D+/232D+ to the original default settings, go to the System Options
>Maintenance web page (described in Maintenance, on page 45) or use the control button on the AXIS 231D+/232D+ as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 231D+/232D+ to factory default settings using the Control Button.
1.Switch off the AXIS 231D+/232D+ by disconnecting the power.
2.Press and hold the Control button while you reconnect the power.
3.Keep the Control button pressed until the Power Indicator flashes amber (this may take up to 15 seconds).
4.Release the Control button.
Control button
Power Indicator
Network Indicator
5.When the Power Indicator changes
to green (may take up to 1 minute), the process is complete and the AXIS 231D+/232D+ has been reset.