Axis Communications AXIS T8120 manual Axis T8120 Installation Guide

Page 4 AXIS T8120 Installation Guide

•The AC wall socket outlet must be near the product and easily ac- cessed. AC power can be removed from the product by disconnect- ing the AC power cord from either the wall socket-outlet or from the products appliance coupler.

•The products “DATA IN” and “DATA & POWER OUT” interfaces are qualified as Safety Extra-low Voltage (SELV) circuits according to IEC 60950-1. These interfaces can only be connected to SELV interfaces on other equipment.

•The product should only be connected to the IP device with which it was bought. Using the product with other IP devices can cause damage to the IP device.

•Follow basic electricity safety measures whenever connecting the device to its power source.

•Read the installation instructions before connecting the product to its power source.

•A voltage mismatch can cause equipment damage and may pose a fire hazard. If the voltage indicated on the label is different from the power outlet voltage, do not connect the product to this power outlet.

•The product can be used only in Restricted Access Locations.