Axis Communications M1014 Advanced, Control Queue

AXIS M1014 Network Camera

PTZ (Pan Tilt Zoom)

2. Enter a descriptive name.

3. Specify the pause length between runs.

4. Select an available preset position and click Apply.

5. Specify the View Time in seconds or minutes.

6. Specify the View Order or select the Random view order option.

7. Click Save.

To modify or remove guard tours, go to PTZ>GuardTour, select the guard tour in the Guard Tour List and click Modify/Remove.

For more information see the online help .

Advanced

Controls

Panel Shortcut Command Buttons can be conﬁgured to provide direct access to commands issued via the VA PIX® Application

Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page through

the Ctrl panel button, see

page 9

.

Control Queue

The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons

appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

A user who belongs to a group (see

Users, on page 31

) with a higher PTZ priority can go before other users in the queue and

take control of the product. The order of priority is as follows:

1. Administrator — An administrator takes over PTZ control regardless of who is ﬁrst in queue. The administrator will be

removed from the queue 60 seconds after the last PTZ control command.

2. Event — The Axis product can be conﬁguredtogotoapr

eset position when triggered by an alarm (see

Events, on page 26

).

The event will immediately be placed ﬁrst in the queue except when an administrator is in control.

3. Operator — Same as administrator but with lower priority

4. Guard Tour — A guard tour (see

page 21

) has PTZ control for an indeﬁnite period of time. It may be overridden by an

operator, event or administrator. The guard tour will resume when higher priority groups leave the queue.

5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed

on to the next viewer in queue.

Note

• The administrator can enable and disable PTZ controls for selected users.

•Toid

entify different users in the viewer group, cookies must be enabled on the client.

22

Contents

Main About this document Liability Intellectual Property Rights Equipment Modications Trademark Acknowledgments Table of Contents HardwareOverview .......................................... 4 AccessingtheProduct ....................................... 6 MediaStreams ............................................. 10 SettingUptheProduct ...................................... 13 Page Hardw are Over view page 34 LED Indicators Technical Specications, on page 46 Access from a Browser Set the Root Password, on page 7 Access from the Internet NAT traversal (port mapping) for IPv4, on page 35 Set the Root Password Reset to Factory Default Settings, on page 40 Set Power Line Frequency The Live View Page Controls on the Live View Page page 8 Stream Proles, on page 15 AXIS Media Control viewer toolbar AXIS Media Control (AMC), on page 10 Controls, on page 22 View Area, on page 16 PTZ Controls AXIS M1014 Network Camera How to Stream H.264 MJPEG AXIS Media Control (AMC) Alternative Methods of Accessing the Video Stream Page Setting Up the Product Setting Up the Product Basic Setup AXIS M1014 Network Camera Video Stream Pixel Counter Image Overlay, on page 17 Stream Proles Camera Settings Image Appearance White Balance Exposure Settings View Area Overlay File Naming & Date/Time Formats Privacy Mask Date & Time, on page 33 Overlay Image Page Default Viewer for Browsers Viewer Settings AXIS Media Control (AMC), on page 10 User Dened Links View Area, on page 16 Preset Positions page 21 page 26 File Naming & Date/Time Formats Guard Tour Advanced Controls page 21 Users, on page 31 page 9 Camera Tampering Motion Detection Setting Up an Action Rule, on page 27 Set Up Motion Detection Windows, on page 24 Motion Detection Parameters, on page 24 Set Up Motion Detection Windows Motion Detection Parameters Motion Detection Parameters Page Motion Detection, on page 23 Camera Tampering, on page 23 Guard Tour, on page 21 Schedules, on page 28 Recurrences, on page 28 Setting Up an Action Rule page 24 page 38 Recipients Schedules Recurrences Record ings Recordings page 29 Recording List, on page 29 page 27 Recording List Page Security Users ONVIF IP Address Filter HTTPS IEEE 802.1X Certicates Date & Time NTP Conguration, on page 35 DNS Conguration, on page 34 File Naming & Date/Time Formats Network Advanced TCP/IP Settings page 31 SOCKS QoS (Quality of Service) SMTP (email) SNMP HTTPS, on page 31 UPnP RTP/H.264 Storage SD Card Network Share Maintenance Upgrading the Firmware, on page 42 Troubleshooting, on page 42 Support Support Overview Advanced Scripting File Upload Plain Cong Reset to Factory Default Settings Hardware Overview, on page 4 Page Symptoms, Possible Causes and Remedial Actions Date & Time, on page 33 NAT traversal (port mapping) for IPv4, on page 35 AXIS Media Control (AMC), on page 10 Emergency Recovery Procedure, on page 42 Performance Considerations, on page 48 Internet Explorer only Overlay Image Settings Page Page Performance Considerations