Axis Communications M1014 user manual Hardware Overview, Connectors

AXIS M1014 Network Camera

Hardware Overview

Hardware Overview

1	4
2
	5
3
	6
	7
	8
	9

10

11

12

1Status LED indicator

2Focus ring

3Lens

4Network connector (RJ-45)

5Power connector

6Lock ring

7Control button

8SD card slot (microSDHC)

9Power LED indicator

10Network LED indicator

11LED indicator (not used)

12Part number (P/N) & Serial number (S/N)

The Axis product is equipped with a lens with manual focus. It is delivered with the lens prefocused and manual focusing is usually not required.

Note

Only change the focus if required, for example if the image is blurry.

Connectors

For technical specifications, see page 46.

Network connector - RJ-45 Ethernet connector.

NOTICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See Electromagnetic Compatibility (EMC) for regulatory requirements.

4