![](/images/new-backgrounds/1179428/1794289x1.webp)
AXIS M11 Series | Page 5 |
| ||
LED indicators |
|
|
| |
LED | Color | Indication |
|
|
|
|
|
|
|
Network | Green | Steady for connection to a 100 Mbit/s network. Flashes |
|
|
|
| for network activity. |
|
|
|
|
|
|
|
| Amber | Steady for connection to 10 Mbit/s network. Flashes for |
|
|
|
| network activity. |
|
|
|
|
|
| ENGLISH |
| Unlit | No network connection. |
| |
|
|
|
| |
|
| Note: Configure the Status LED to be unlit during normal |
| |
Status | Green | Steady green for normal operation. |
|
|
|
| operation, or to flash only when the camera is accessed |
|
|
|
|
| ||
|
| from Setup > System Options > LED. See the online help |
|
|
|
| files for more information. |
|
|
|
|
|
|
|
| Amber | Steady during startup, reset to factory default or when |
|
|
|
| restoring settings. |
|
|
|
|
|
|
|
| Red | Slow flash for failed upgrade. |
|
|
|
|
|
|
|
Power | Green | Normal operation. |
|
|
|
|
|
|
|
| Amber | Flashes green/amber during firmware upgrade. |
|
|
|
|
|
|
|
Install the hardware
Important!
AXIS M11 Series is designed for indoor and outdoor use. To use the camera outdoors, install in an approved outdoor housing. Please see www.axis.com for more information on outdoor housings.
1.Attach the stand to the camera by screwing it on. For wall mounting, attach the stand to wall first, using 3 appropriate screws.
2.Attach the cable to the network connector (supports PoE class 1) in the camera.
3.Check that the indicator LEDs indicate the correct conditions. See table above.