Manuals / Axis Communications / Photography / Security Camera

Axis Communications M1143-L LED Indicators, SD Card Slot, Control Button, Color Indication

Models: M1143-L

1 60

Download 60 pages 7.38 Kb

Page 7

AXIS M1143–L - User Manual

Hardware Overview

•Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under System Options > Ports & Devices).

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications on page 56.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Note

For SD card recommendations see www.axis.com

Control Button

For location of the control button, see Hardware Overview on page 6 .

The control button is used for:

•Resetting the product to factory default settings. See page 50.

•Connecting to an AXIS Video Hosting System service. See page 43. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 43. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED	Color	Indication

Network	Green	Steady for connection to a 100 Mbit/s network. Flashes for network activity.

	Amber	Steady for connection to a 10 Mbit/s network. Flashes for network activity.

	Unlit	No network connection.

Status	Green	Steady green for normal operation.

	Amber	Steady during startup and when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

7

Image 7

Axis Communications M1143-L user manual LED Indicators, SD Card Slot, Control Button, Color Indication

Contents

Page Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportTable of Contents Connectors Performance Considerations Symptoms, Possible Causes and Remedial ActionsHardware Overview Connectors and ButtonsNetwork Connector ConnectorColor Indication LED IndicatorsSD Card Slot Control ButtonSet the Root Password Access the ProductAccess from a Browser Access from the InternetManual Trigger Live ViewControls on the Live View Click Use HttpsTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar PTZ ControlsAccess the Product Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamMedia Streams Basic Setup Set Up the ProductPixel Counter Click Save to apply the new settingsVideo Video Stream264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceBuilt-in IR Illuminations LEDs To configure the view areaView Area OverlayGo to Video Overlay Image Overlay ImageGo to Events Action Rules Focus AdjustmentPrivacy Mask Use Overlay Text in an Action RuleBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsAdvanced Preset PositionsPTZ Pan Tilt Zoom Guard TourControl Queue Operator Same as administrator but with lower priorityGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsDetectors Application Licenses Install ApplicationGo to Setup Applications ApplicationsApplications Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StorageActions Add RecipientsRecipient Types Create Schedules Set Up Email RecipientsGo to Events Schedules and click Add Go to Events Recurrences and click Add Set Up RecurrencesGo to Recordings List RecordingsFind Recordings Play RecordingContinuous Recording Export Video ClipGo to Recordings Continuous Languages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Format SD Card StorageSD Card Mount and Unmount SD CardPorts MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingSystem Options Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserVideo Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Power Function/group Specifications Events actionsInstallation Maintenance General CasingFunction/group Specifications Warranty ConnectorsFunction Pin Specifications Performance Considerations M2.13