Axis Communications M1143-L user manual Add Recipients, Actions, Recipient Types

AXIS M1143–L - User Manual

Events

Actions

Available actions include:

•IR Illumination – Activate or deactivate IR light.

•Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).

•Output Port – Activate an I/O port to control an external device.

•Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 21.

•PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour on page 24.

•Record Video – Record video to a selected storage.

•Send Images – Send images to a recipient.

•Send Notifications – Send a notification message to a recipient.

•Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured under System Options > Network > SNMP.

•Send Video Clip – Send a video clip to a recipient.

•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.

Add Recipients

The product can send media files and messages to notify users about events. Before the product can send media files or notification messages, you must define one ore more recipients. For information about available options, see Recipient Types on page 33.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

Recipient Types

The following recipients are available:

Recipient	Use with action	Notes
Email	Send Images	An email recipient can contain multiple email addresses. For
	Send Notification	more information about email recipients, see Set Up Email
		Recipients on page 34
	Send Video Clip

33