AXIS P1214 Network Camera
Hardware Overview
1.Cut the cable to the desired length. Measure from the sensor unit.
2.Strip the plastic outer coating from the end of the cable.
3.Peel back the shield.
4.Flatten the colored wires in the order described below.
1Brown
2White/brown
3Not used
4Not used
5White/blue
6Blue
5.Insert the wires all the way into a shielded 6P6C RJ12 connector. Make sure that the wires stay in the correct order.
6.Use a crimping tool to fasten the connector to the cable.
6
