Hardware Overview, Connectors | Axis Communications P1214-E guide

AXIS P1214 Network Camera

Hardware Overview

1Power indicator LED

2Status indicator LED

3Network indicator LED

4SD card slot (microSD card)

5Camera connector

6I/O terminal connector

7Main unit

8Network connector

9Control button

10Power connector

11Mounting rail

12Sensor unit

13Mounting bracket

Connectors

For technical specifications, see page 45.

Network connector - RJ45 Ethernet connector. Supports Power over Ethernet (PoE).

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. For information about regulatory requirements, see .

SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.

Page 4

Image 4

Axis Communications P1214-E user manual Hardware Overview, Connectors

Contents

Axis P1214 Network Camera About this document LiabilityIntellectual Property Rights Equipment Modifications Table of Contents Axis P1214 Network Camera Hardware Overview ConnectorsHardware Overview Shorten Sensor Unit Cable LED IndicatorsColor Indication Axis P1214 Network Camera Accessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordNetwork TCP/IP Advanced Click Create self-signed certificate Set Power Line Frequency Go to Setup EventsLive View Controls on the Live View Axis Media Control viewer toolbar How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMC Alternative Methods of Accessing the Video Stream Axis P1214 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel Counter Image Stream Profiles264 Camera Settings Exposure SettingsOverlay Image Appearance Privacy Mask Overlay ImageGo to Video Video Stream and select the Image tab Go to Video Overlay Image Axis P1214 Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Viewer Settings Go to Setup Live View ConfigUser Defined Links Output Buttons For more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion Detection Set Up Motion Detection Windows Motion Detection Parameters Applications Applications Events Events Events Setting Up an Action Rule RecipientsGo to Events Action Rules and click Add Recipient Use with action Schedules RecurrencesGo to Events Recipients and click Add Go to Events Schedules and click Add Recordings RecordingsRecording List Continuous Recording System Options System OptionsSecurity Users Ieee Date & TimeCertificates Basic TCP/IP Settings Network Axis Internet Dynamic DNS Service Linux/Unix syntaxLinux/Unix example Axis Video Hosting System Avhs Advanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name Configuration NAT traversal port mapping for IPv4 FTP QoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTM Storage RTP/H.264Bonjour SD Card Maintenance Ports & DevicesNetwork Share Ports Support Advanced Plain Config Reset to Factory Default SettingsFile Upload Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the Firmware Problems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalVideo Camera Settings Storage and disk management problems Technical Specifications Technical Specifications Function/group Specifications System Application Maintenance Installation aidsPower Connectors Function/group Specifications Video Performance Considerations M4.4