AXIS P1214 Network Camera
Events
For more information, see the online help 
.
Triggers
Available action rule triggers and conditions include:
•Applications – Use installed applications to trigger the rule. See Applications on page 28.
•Detectors
-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 25.
-Tampering – Trigger the rule when tampering is detected. See Camera Tampering on page 25.
•Hardware
-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.
•Input Signal
-Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. See I/O Ports on page 44.
-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 11 . This can for example be used to validate actions during product installation and configuration.
•Storage
-Available – Trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.
-Full – Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.
-Locked – Trigger the rule if the storage device is locked (write protected).
•System
-System Initializing – Trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.
•Time
-Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 32. This can for example be used to upload an image every 5 minutes.
-Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 32.
Actions
Available actions include:
•Output Port – Activate an I/O port to control an external device.
•Record Video – Record video to a selected storage.
•Send Images – Send images to a recipient.
•Send Notifications – Send a notification message to a recipient.
•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.
31
