Axis Communications P1344, P1347 manual Axis Camera Management multiple cameras/large installations

Page 8 AXIS P13 Network Camera Series Installation Guide

AXIS Camera Management - multiple cameras/large installations

AXIS Camera Management can automatically discover multiple Axis devices, show connection status, manage firmware upgrades and set IP addresses.

Automatic discovery

1.Check that the camera is connected to the network and that power has been applied.

2.Start AXIS Camera Management. When the network camera appears in the window, right-click the link and select Live View Home Page.

3.See page 9 for instructions on how to set the password.

Assign an IP address in a single device

1.Select the network camera in AXIS Camera Management and click the Assign IP button .

2.Select Assign the following IP address and enter the IP address, the subnet mask and default router for the device.

3.Click OK.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of assigning IP addresses to multiple devices, by suggesting IP addresses from a specified range.

1.Select the devices you wish to configure (different models can be selected) and click the Assign IP button .

2.Select Assign the following IP address range and enter the range of IP addresses, the subnet mask and default router the devices will use.

3.Click Update. Suggested IP addresses are listed under New IP Addresses and can be edited by selecting a device and clicking the Edit button.

4.Click OK.