Axis Communications P1354-E user manual Technical Specifications Connectors, Terminal connector

AXIS P1354–E Network Camera

Technical Specifications

Connectors

I/O terminal connector

4–pin terminal block for:

•Digital Input

•Digital Output

•Auxiliary power and ground (GND)

Function	Pin	Notes	Specifications
GND	1	Ground
3.3 V DC Power	2	Can be used to power auxiliary equipment.	Max load = 50 mA
		Note: This pin can only be used as power out.
Digital Input	3	Connect to GND to activate, or leave floating (unconnected)	0 to +40 V DC
		to deactivate.
Digital Output	4	Internal connection to ground when activated, floating	Max load =100 mA
		(unconnected) when deactivated. If used with an inductive	Max voltage = +40 V DC
		load, e.g. a relay, a diode must be connected in parallel with
		the load, for protection against voltage transients.

Power connector DC power input

2-pin terminal block for power input.

63