AXIS P1405–E Network Camera
Hardware Overview
Control Button
For location of the control button, see Hardware Overview on page 5 .
The control button is used for:
•Resetting the product to factory default settings. See page 47.
•Connecting to an AXIS Video Hosting System service. See page 41. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.
•Connecting to AXIS Internet Dynamic DNS Service. See page 41. To connect, press and hold the button for about 3 seconds.
LED Indicators
Note
•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.
Status LED | Indication |
|
|
Unlit | Connection and normal operation. |
|
|
Green | Shows steady green for 10 seconds for normal operation after startup completed. |
|
|
Amber | Steady during startup. Flashes during firmware upgrade. |
|
|
Amber/Red | Flashes amber/red if network connection is unavailable or lost. |
|
|
Red | Flashes red for firmware upgrade failure. |
|
|
6
