AXIS P5415–E PTZ Dome Network Camera

Repainting the Camera

Repainting the Camera

The covers can be repainted to match the installation environment.

The material used in the covers is ASA Geloy XTWM206. Use paint suitable for this material.

1.Remove the two top cover screws.

2.Use a thin palette knife to release the locking tabs while pulling the top cover straight upwards to remove the cover.

3.Remove the two bottom cover screws and remove the bottom cover.

4.Mask the locking tabs in the bottom cover and the three screw covers.

5.Repaint the top cover, the bottom cover, the screw covers, and the conduit cover.

6.Assemble in the reverse order.

1Top cover screw

2Top cover

3Locking tab

4Bottom cover screw

5Bottom cover

6Conduit cover

7Screw cover

57

Page 57
Image 57
Axis Communications P5415E user manual Repainting the Camera