AXIS P5534 PTZ Dome Network Camera

Hardw are overv iew

Hardware overview

65 74

1

2

3

1Part number (P/N) & Serial number (S/N)
2Network connector (High PoE)
3Multi-connector
4Control button
5SD memory card slot
6Status LED indicator
7Restart button

Connectors

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.
Caution
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network
cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be
shielded (STP) and intended for their specic use. Make sure that the midspan is properly grounded. See Electromagnetic
Compatibility (EMC) for regulatory requirements.
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage. For
instructions on how to insert and remove an SD card, please refer to the Installation Guide.
Note
Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup
>SystemOptions>Storage>SDCardand click Unmount.
Control button - The control button is used for:
• ConnectingtoanAXISVideoHostingSystemservice.Seepage40. To connect, press and hold the button for about
1 second until the Status LED ashes green.
5