AXIS P5534 PTZ Dome Network Camera
Hardw are overv iew
• ConnectingtoAXISInternetDynamicDNSService.Seepage 40. To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See page 46.
Restart button - Press to restart the product.
Multi-connector - Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP
rating, see Multi-Connector Cable (sold separately), on page 47.
LED indicators
Color Indication
Unlit Connection and normal operation
Amber Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for firmware upgrade failure.
Green Shows steady green for 10 seconds for normal operation after restart.
Note
• TheStatus LED can be configured to flash while an event is active.
Midspan LED indicators
LED Color Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, flashing Slow flash when over current or short circuit condition on the port.
Port
Green, flashing Fast flash when input voltage is out of range or other internal error.
AC input Green Steady when AC power connected.
6