AXIS P7210 Video Encoder

Hardware Overview

Hardware Overview

1Power connector

2microSD card slot

3I/O connector

4RS-485/RS-422

5Control button

6Network connector (PoE)

7Audio input 1

8Audio input 2

9Audio output 1

10Video inputs

11LED indicators

12Group 1 (4 video input connectors)

13Group 2

14Group 3

15Group 4

Connectors and Buttons

For technical specifications, see page 56.

BNC Connector

Each video input is terminated using a coax/BNC connector. Connect a 75 Ohm coaxial video cable; the recommended maximum length is 250 m (800 ft).

Note

75 Ohm video termination can be enabled/disabled for the video input through the product's web page at Video & Audio > Camera Settings > Video termination. This termination is enabled on factory default. In cases where the product is to be connected in parallel with other equipment, for optimum video quality, it is recommended that termination be enabled for only the last device in the video signal chain.

Network Connector

RJ45 Ethernet connector. Supports Power over Ethernet (PoE).

5

Page 5
Image 5
Axis Communications P7210 user manual Hardware Overview, Connectors and Buttons, BNC Connector, Network Connector