AXIS P7210 Video Encoder
System Options
3.Keep the control button pressed for about
4.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90
5.Using the installation and management software tools, assign an IP address, set the password, and access the video stream.
Note
To reset a single channel to the original factory default settings, use the button provided in that unit’s web interface.
It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.
50
