AXIS Q60 Series
1Network connector – RJ45 Push-pull Connector (IP66)
2Network connector and network connector shield
3Ground screw T20
4Washer
5Cable shoe
5.Attach the grounding wire to the cable shoe using cable shoe pliers.
6.Put the cable shoe and washer back in their original positions and tighten the screw (torque 0.5 Nm). Make sure the cable shoe is in contact with the grounding surface.
7.Connect supplied RJ45
8.Connect the network cable to the camera.
NOTICE
Be careful not to damage the network cable when connecting it.
9.Slide the unit holders on the network camera into the slots in the mounting bracket and rotate the camera unit.
10.Secure the network camera to the mounting bracket by tightening the screws.
16