Axis Communications Q6045-E, Q6044-E manual Access the Product, Reset to Factory Default Settings

AXIS Q60 Series

1Data and power out (connect to Axis product)

2Data in (connect to network)

3AC input LED indicator

4Port LED indicator

4.Make sure that the LEDs on the midspan indicate the correct conditions. See Midspan LED Indicators on page 12.

Access the Product

Use the tools provided on the Installation and Management Software CD to assign an IP address, set the password and access the video stream. This information is also available from the support pages on www.axis.com/techsup/

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Press and hold the control button and the power button for about 15–30 seconds until the status LED indicator flashes amber. See Hardware Overview on page 10.

2.Release the control button but continue to hold down the power button until the status LED indicator turns green.

3.Release the power button and assemble the product.

18